| Model |
| Brand | Supermicro |
| SYS-6026TT-iBQF | SuperServer 6026TT-IBQF (Black)
|
| Motherboard |
4x Super X8DTT-IBQF |
| Processor/Cache |
| CPU |
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5500 sequence (Nehalem-EP processor)
|
| QPI | up to 6.4 GT/s |
| System Memory |
| Memory Capacity |
12x 240-pin DIMM sockets
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
Memory Mirroring supported
|
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB |
| Memory Voltage | 1.5 V |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| On-Board Devices (per Node) |
| Infiniband |
Mellanox ConnectX QDR Infiniband 40Gbps Controller |
| Chipset |
Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D
|
| SATA |
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
|
| Network Controller |
Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
|
| Graphics |
Matrox G200eW 8 MB DDR2
|
| Super I/O |
Winbond W83527HG chip |
| Input / Output (per Node) |
| LAN |
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port |
| Serial ATA | Six Serial ATA ports 3 SATA hard drives supported |
| USB |
2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
1x VGA Port |
| Serial Port |
1 Fast UART 16550 serial port |
| Infiniband |
1 External QSFP Infiniband Connector |
| Chassis |
| Form Factor |
2U Rackmount |
| Model |
SC827TQ-1200B
|
| Dimensions |
| Form Factor |
3.5" x17.2" x 28.5" (H x W x D) |
| Gross Weight |
85 lbs (38.6kg) |
| Front Panel |
| Buttons | Power On/Off button
UID button
|
| LEDs |
Power LED (on power button)
UID LED (on UID button)
Network activity LED
System Overheat/fan fail/power fail/ LED
|
| Expansion Slots (per Node) |
| PCI-Express |
1 (x16) PCI-E ( Low Profile) |
| Drive Bays (per Node) |
| Hot-Swap |
3x 3.5" SATA Hot-swap drive bays |
| Backplane |
| Hard drive Backplane | 2U Hard drive Backplane |
| Peripheral Drives |
| - |
- |
| System Cooling |
| Fans |
4x Cooling Fans |
| PSU |
| Power Supply | 1200W high-efficiency power supply with PMBus |
| AC Input |
100 - 140V, 50 - 60Hz, 7.5 - 11Amp
180 - 240V, 50 - 60Hz, 5 - 8Amp
|
DC Output
+5V standby | 4 Amp |
DC Output
+12V |
74 Amp @ 100-140V
100 Amp @ 180-240V |
