|
Supermicro SYS-6037R-72RFT+ 3U LGA2011 C602, 8x 3.5 Hot-Swap HDD, 10GBase-T, IPMI, 1280W Redundant PSU w/ X9DR7-TF+, CSE-835BTQ-R1K28B SuperServer
|
|
Images shown for reference only
|
|
Supermicro SYS-6037R-72RFT+ 3U LGA2011 C602, 8x 3.5 Hot-Swap HDD, 10GBase-T, IPMI, 1280W Redundant PSU w/ X9DR7-TF+, CSE-835BTQ-R1K28B SuperServer SYS-6037R-72RFT+ 3U LGA2011 C602, 8x 3.5 Hot-Swap HDD, 10GBase-T, IPMI, 1280W Redundant PSU w/ X9DR7-TF+, CSE-835BTQ-R1K28B SuperServer
|
|
|
|
Shipping Extra
|
|
ATACOM Part #: SYI3_SUPE_37_14
|
|
Price: $2311.95
|
|
|
|
Model | Brand | Supermicro | SYS-6037R-72RFT+ | SuperServer 6037R-72RFT+ (Black) | Motherboard | Super X9DR7-TF+ | Processor/Cache | CPU | Intel® Xeon® processor E5-2600 (up to 135W TDP *) Dual Socket R (LGA 2011) * Please contact your Supermicro sales representative for additional details | Cache | Up to 20MB | QPI | QPI up to 8 GT/s | GPU/MIC Support | M2050/M2070(Q), up to 135W CPU at 30°C M2090, up to 135W CPU at 30°C K10 (Kepler), up to 135W CPU at 35°C K20 (Kepler), up to 135W CPU at 30°C Xeon Phi, up to 135W CPU at 30°C | System Memory | Memory Capacity | 24x 240-pin DDR3 DIMM sockets Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | Memory Voltage | 1.5 V, 1.35 V | Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) | On-Board Devices | SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10 | Chipset | Intel® C602J Chipset | SAS | SAS2 via LSI 2208 HW RAID 0, 1, 5, 6, 10, 50, 60 support | IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC | Network Controllers | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) | Graphics | Nuvoton W83527HG | Super I/O | - | Clock Generator | - | Input / Output | SATA/SAS | 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) 8x SAS2 ports (6Gbps) | LAN | 2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port | JBOD | - | USB | 9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A) | VGA | 1x VGA Port | Serial Port | 2x Fast UART 16550 ports: 1 rear and 1 header | System BIOS | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI | Chassis | Form Factor | 3U Rackmount | Model | CSE-835BTQ-R1K28B | Dimensions | Form Factor | 5.2" x 17.2 " x 25.5" (H x W x D) | Gross Weight | 74.8 lbs (34kg) | Front Panel | Buttons | Power On/Off button System Reset button | LEDs | Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED | Expansion Slots | PCI-Express | 2x PCI-E 3.0 x16 Full-height Full-length (support 2x GPU cards) 4x PCI-E 3.0 x8 slots Without GPU installed, can support 5x Full-height Full-length, and 1x half length | PCI-E card | With 2x GPU installed, can support 1x Full-height Full-length and 1x Half-length PCI-E cards (both CPUs need to be installed for full access to PCI-E slots. See manual for details) | Drive Bays | Hot-swap | 8x 3.5" Hot-swap SAS/SATA HDD trays SAS or enterprise SATA HDD only recommended | Peripheral Bays | 2x 5.25" Peripheral Drive Bay | Backplane | Backplane | 1x SAS2 / SATA backplane | System Cooling | Fans | 4x 8cm 9.5K RPM, Middle fans 2x 8cm 6.7K RPM, Rear Exhaust fan | Shroud | - | Power Supply | Power Supply | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | AC Voltage | 1000W Output @ 100-140V, 12-8A, 50-60Hz 1280W Output @ 180-240V, 8-6A, 50-60Hz | DC Output | 1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A Certification 80 PLUS Platinum [ Test Report ] | With Power Distributor | - | | Key Features 1. Intel® Xeon® processor E5-2600 family; QPI up to 8GT/s 2. Up to 768GB DDR3 1600MHz* ECC Registered DIMM; 24x DIMM sockets * Depends on memory configuration 3. Expansion slots: (support 2 GPU/MIC) 2 PCI-E 3.0 x16 and 4 PCI-E 3.0 x8 4. Intel® X540 Dual port 10GBase-T 5. I/O ports: 2x 10Gb LAN, 1x Dedicated LAN for IPMI Remote Management, 1x VGA, 1x COM port, 2x USB 2.0 6. 8x 3.5" Hot-swap Drive Bays and 2x 5.25" Peripheral Drive Bays 7. 4x middle fans & 2x rear exhaust fans 8. 1280W Redundant Power Supplies 80 PLUS, Platinum Level (94%) 9. Battery Backup Power (optional, PWS-1K03B-1R) |
|