Motherboard Super X11SPD-F

Processor/Cache (per Node) CPU Single Socket P (LGA 3647) 2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors Support CPU TDP 165W Cores Up to 28 Cores Note Low TCase CPUs may require additional configuration. Please contact Supermicro Sales contact for additional information. Note BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R)

	System Memory (per node) Memory Capacity 4 DIMM slots Up to 1TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel OptaneTM DCPMM Memory Type 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.

	Network Devices (per node) Micro-LP NIC Intel i350 GbE LAN controller Dual RJ-45 connectors MicroLP Adapter Matrix (Networking options)

	On-Board Devices (per node) Chipset Intel C621 chipset SATA SATA3 (6Gbps) via C621 controller IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support ASPEED AST2500 BMC Graphics ASPEED AST2500 Graphics (BMC with Graphic controller)

	Input / Output (per node) SATA 2 SATA3 (6Gbps) ports LAN 2 RJ45 Gigabit Ethernet LAN ports KVM 1 VGA, 1 COM and 2 USB 2.0 (with KVM dongle)

	System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3

	Management Software Intel Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor 5 Watchdog

	Rear Window (each node) Switch Power / UID

	Chassis Form Factor 3U Model CSE-938NH-R2K20BP

	Color Black

	Front Panel Buttons Power On/Off button LEDs Power LED Node status LED

	Expansion Slots (per node) PCI-Express 1 PCI-E 3.0 x16 (Low-profile) slot 1 Micro-LP PCI-E 3.0 x8 slot M.2 M.2 Interface: 2 SATA/PCI-E 3.0 x4 M.2 Form Factor: 2280 M.2 Key: M-Key

	Drive Bays (per node) Internal 2x 3.5" SATA3 (6Gbps) HDDs per node (or 2x 2.5" Hybrid SATA3/NVMe with optional kits), up to 16 HDDs total Enterprise SATA HDD only recommended

	System Cooling Fans 4 Hot-swap 8cm cooling fans fan speed control

Power Supply 2200W Redundant Power Supplies with PMBus Total Output Power and Input 1200W with Input 100-127Vac 1800W with Input 200-220Vac 1980W with Input 220-230Vac 2090W with Input 230-240Vac 2200W with Input 220-240Vac (for UL/cUL use only) 2090W with Input 230-240Vdc (for CCC only) AC Input Frequency 50-60Hz +12V Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 183.3A / Min: 0A (220-240Vac) 5VSB Max: 1A / Min: 0A Output Type Backplanes (gold finger) Certification Titanium Level

	PC Health Monitoring CPU Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V FAN Cooling zone Temperature Monitoring for CPU and chassis environment

	Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10oC to 35oC (50oF to 95oF) Non-operating Temperature: -40oC to 70oC (-40oF to 158oF) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

	Item Dimension (L inchxW inchxH inch) 34 x 27 x 12 Weight 88.00 lb Warranty Information 1 Year