| Model |
| Brand | Supermicro |
| SYS-4027GR-TR | SuperServer 4027GR-TR(Black) |
| Motherboard | Super X9DRG-OF-CPU |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 150W TDP **) Dual Socket R (LGA 2011) |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| Note | † BIOS version 3.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| GPU/Xeon Phi Support | K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C K40 (Atlas), up to 150W CPU at 30°C Xeon Phi, up to 150W CPU at 30°C |
| System Memory |
| Memory Capacity | 24x 240-pin DDR3 DIMM sockets Up to 1.5TB DDR3 ECC LRDIMM Up to 768GB DDR3 ECC Registered memory (RDIMM) Up to 192GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V,1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset | Intel® C602 chipset |
| AHCI SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 |
| SCU SATA | SATA 2.0 3Gbps with RAID 0,1,10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) |
| Graphics | Matrox G200eW 16MB DDR2 graphics controller |
| Super I/O | Nuvoton W83527HG |
| Input / Output |
| AHCI SATA | 2 SATA 3.0 ports (6 Gbps) 4 SATA 2.0 ports (3 Gbps) |
| SCU SATA | 4 SATA 2.0 ports (3 Gbps) |
| LAN | 2 x RJ45 10 Base-T ports 1 x dedicated LAN port for IPMI |
| USB | 9 x USB 2.0 ports total (4x rear + 4x via header + 1x Type A) |
| Serial Port/Header | 1x Fast UART 16550 ports:1 header |
| System BIOS |
| BIOS Type | 16MB SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Chassis |
| Form Factor | 4U Rackmountable Rackmount Kit (MCP-290-00057-0N) |
| Model | CSE-418GTS-R3200B |
| Dimensions |
| Height | 7.0"(178mm) |
| Width | 17.2"(437mm) |
| Depth | 29"(737mm) |
| Weight | Net Weight:80 lbs(36.2kg) Gross Weight:135 lbs(61.2kg) |
| Available Colors | Black |
| Drive Bays |
| Hot-swap | 24x 2.5" Hard drive bays |
| Expansion Slots |
| PCI-Express | 8x PCI-E 3.0 x16 (double-width) slots 2x PCI-E 3.0 x8 (in x16) slot 1x PCI-E 2.0 x4 (in x16) slot |
| Backplane |
| SAS/SATA HDD Backplane |
| System Cooling |
| Fans | 8x 92mm RPM Hot-Swappable Cooling Fans |
| Shrouds | 1x Air Shroud (MCP-310-84806-0B) 1x Air Shroud (MCP-310-84807-0B) |
| Power Supply |
| 1000W/1600W 1U Redundant Power Supply |
| AC Input | 1000W @ 100-127V, 12.9A Max., 50-60Hz 1600W @ 200-240V, 9.5A Max., 50-60Hz |
| DC Output | 1000W: +12V/82A; +12Vsb/2A 1600W:+12V/132A; +12Vsb/2A |
| Certification | Platium Level |
| PC Health Monitoring |
| CPU | Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V |
| FAN | 4-pin fan headers with tachometer status monitoring Low noise fan speed control mode |
| Temperature | Monitoring for CPU and system environment Thermal Control for 8x fan connectors |
| Other Features | Chassis intrusion dection |
| Operating Environment/Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
