| Model |
| Brand | Supermicro |
| SYS-4027GR-TRT | SuperServer 4027GR-TRT (Black) |
| Motherboard | Super X9DRG-OTF-CPU |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 150W TDP **)
Dual Socket R (LGA 2011)
Cache
Up to 30MB
System Bus
QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
GPU/Xeon Phi Support
K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C
K40 (Atlas), up to 150W CPU at 30°C
Xeon Phi, up to 150W CPU at 30°C |
| QPI | up to 6.4 GT/s |
| System Memory |
| Memory Capacity | 24x 240-pin DDR3 DIMM sockets
Up to 1.5TB DDR3 ECC LRDIMM
Up to 768GB DDR3 ECC RDIMM
Up to 192GB DDR3 ECC/non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB , 8GB , 16GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| GPU | - |
| Chipset | Intel® C602 chipset |
| SATA | AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers | Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T , 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200 (Nuvoton WPCM450 BMC) |
| Super I/O | Nuvoton W83527HG |
| Clock Generator | - |
| Input / Output |
| Serial ATA | AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
SCU SATA
4x SATA 2.0 ports (3Gbps) |
| LAN | 2x RJ45 10GBase-T ports
1x dedicated LAN port for IPMI |
| USB | 10x USB 2.0 ports total
(4x rear + 4x via header + 2x Type A) |
| VGA | - |
| Serial Port | 1x Fast UART 16550 ports: 1 header |
| System BIOS |
| BIOS Type | 16MB SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support |
| Chassis |
| Form Factor | 4U Rackmountable
Rackmount Kit (MCP-290-00057-0N) |
| Model | CSE-418GTS-R3200B |
| Dimensions |
| Form Factor | 7.0" (178mm)x 17.2" (437mm)x 29" (737mm) |
| Gross Weight | 80 lbs (36.2 kg) |
| Front Panel |
| Buttons | - |
| LEDs | - |
| Expansion Slots |
| PCI-Express | 8x PCI-E 3.0 x16 (double-width) slots
2x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 2.0 x4 (in x16) slot |
| Drive Bays |
| Hot-Swap | 24x 2.5" Hard drive bays |
| Backplane |
| Backplane | SAS/SATA HDD Backplane |
| System Cooling |
| Fans | Fans
8x 92mm RPM Hot-Swappable Cooling Fans
Shrouds
1x Air Shroud (MCP-310-84806-0B)
1x Air Shroud (MCP-310-84807-0B) |
| Power Supply |
| Power Supply | 1000W/1600W 1U Redundant Power Supply |
| AC Input | 1000W @ 100-127V, 12.9A Max., 50-60Hz
1600W @ 200-240V, 9.5A Max., 50-60H |
DC Output
+5V standby | 1000W: +12V/82A; +12Vsb/2A
1600W: +12V/132A; +12Vsb/2A |
| DC Output +12V | - |
