Model |
Brand | Supermicro |
Product SKUs |
- SuperServer S-F647G2-FT+ (Black)
|
Motherboard | Super X9DRFF-iG+ |
Processor/Cache |
CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
|
Note |
† BIOS version 3.0 or above is required |
Cache |
|
System Bus |
|
GPU/Xeon Phi Support |
- 6x Double-width GPU/Xeon Phi per node
(total of 12x GPU/Xeon Phi cards in 4U)
- Supports Intel Xeon Phi
- Supports NVIDIA K10/K20/K20X (Kepler), K1/K2, and M2090/M2075
|
System Memory (Per Node) |
Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
|
DIMM Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
- 64GB, 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltagel |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On Board Devices |
Chipset |
|
AHCI SATA |
- SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA3 (6Gbps) with RAID 0, 1
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
Graphics |
Matrox G200eW |
Input / Output (Per Node) |
AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
|
VGA |
|
Serial Port / Header |
|
Chassis |
Form Factor |
|
Model |
|
Dimentions |
Width | |
Height | |
Depth | |
Weight |
- Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
Available Colors |
|
Front Panel |
Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- System Overheat / Power Fail LED
- UID LED
|
Expansion Slots(Per Node) |
PCI-Express |
- 6x PCI-E 3.0 x16 FH, FL slots
(support 6x Double-width GPU/Xeon Phi)
- 2x PCI-E 3.0 x8 FH, HL slots
|
Drive Bays (Per Node) |
Hot-swap |
- 6x 2.5" Hot-swap SATA HDD bays
|
System Cooling |
Fans |
- 8x 8cm heavy duty fans with air shroud and PWM fan speed control
|
Switching Power Supply |
Note |
2000W Redundant Power Supplies with I2C & PMBus |
AC Voltage |
- 1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz
- 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz
- 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz
- 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz
- 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
|
5Vsb |
|
I2C Remote Monitoring |
|
Certification |
Platinum Certified (Cert. in progress) |
System BIOS |
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI UEFI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
Operating Environment/Compliance |
RoHS |
|
Opetraing Temperature |
10°C to 35°C (50°F to 95°F) |
Non-operating Temperature |
-40°C to 70°C (-40°F to 158°F) |
Operating relative Humidity |
8% to 90% (non-condensing) |
Non-operating Humidity |
5% to 95% (non-condensing) |