|
|
Supermicro SYS-F627R3-FT 4U FatTwin LGA2011 C602, 4 Node, 4x 3.5 Hot-Swap HDD, 2x GBLAN, IPMI, 1280W Redundant PSU w/ X9DRFF, CSE-F424AF-R1K28B SuperServer
|
|
Images shown for reference only
|
|
|
Supermicro SYS-F627R3-FT 4U FatTwin LGA2011 C602, 4 Node, 4x 3.5 Hot-Swap HDD, 2x GBLAN, IPMI, 1280W Redundant PSU w/ X9DRFF, CSE-F424AF-R1K28B SuperServer SYS-F627R3-FT 4U FatTwin LGA2011 C602, 4 Node, 4x 3.5 Hot-Swap HDD, 2x GBLAN, IPMI, 1280W Redundant PSU w/ X9DRFF, CSE-F424AF-R1K28B SuperServer
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYI4_SUPE_47_15
|
|
Price: $3943.95
|
|
|
|
|
 | Product SKUs | | SYS-F627R3-FT | SuperServer F627R3-FT (Black) | | Motherboards | | Motherboards | Super X9DRFF | | Processor/Cache | | CPU Type | Intel® Xeon® processor E5-2600 (up to 135W TDP; 130W TDP up to 47°C *)
Dual Socket R (LGA 2011)
* For details, refer to the user manual | | Cache | Up to 20MB | | System Bus | QPI up to 8 GT/s | | System Memory | | Memory Capacity | 8x 240-pin DDR3 DIMM sockets
Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 64 GB DDR3 ECC Un-Buffered memory (UDIMM) | | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V, 1.35 V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | On-Board Devices | | AHCI SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 | | Chipset | Intel® C602 Chipset | | SAS | SAS2 via LSI 2308
SW RAID 0, 1, 10 support | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC | | Network Controllers | Intel® 82574L Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) | | Graphics | Matrox G200eW | | Super I/O | - | | Clock Generator | - | | Input / Output | | AHCI SATA | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps) | | SAS | - | | LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port | | USB | 2x USB 2.0 ports | | VGA | 1x VGA port | | Serial Ports | 1x Fast UART 16550 port | | Chassis | | Form Factor | 4U Rackmount | | Model | CSE-F424AF-R1K28B | | Front Panel | | Buttons | Power On/Off button
System Reset button | | LED | Power status LED
2x Network activity LEDs
System Overheat LED
Power fail LED | | Expansion Slots | | PCI-Express | 1 PCI-E 3.0 x16 (LP) via riser card | | Drive Bays | | Hot-swap/ Fixed (optional) | 4x 3.5" Hot-swap SAS/SATA HDD trays 6x 3.5" Fixed SAS/SATA HDD trays | | Backplane | | Backplane | 1x SAS2 / SATA backplane | | System Cooling | | Fans | 8x 8cm heavy duty fans with air shroud and PWM fan speed control | | Power Supply | | Power Supply | 1280W Redundant High-efficiency Digital Power Supplies
w/ PMBus 1.2 | | AC Input | 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz | | DC Output | 1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
80 PLUS Platinum
[ Test Report ] | | | Key Features 4 Hot-plug System Nodes in 4U
Front I/O. Each node supports: 1. Intel® Xeon® processor E5-2600
family; QPI up to 8GT/s
2. Up to 256GB DDR3 1600MHz ECC
Registered DIMM; 8x DIMM sockets
3. 1 PCI-E 3.0 x16 (LP) via riser card
4. Front I/O ports: 2 GbE LAN, 2 USB 2.0,
and 1 VGA connector
5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port
6. 4x Hot-swap 3.5" SATA HDDs
7. 1280W Redundant Power Supplies
80 PLUS, Platinum Level (95%) |
|
