Supermicro SSG-6047R-E1R72L2K 4 Node, Dual XEON E5-2600 C602J 4U LGA20

Supermicro SSG-6047R-E1R72L2K 4 Node, Dual XEON E5-2600 C602J 4U LGA2011 SuperServer: SSG-6047R-E1R72L2K

Images shown for reference only

SSG-6047R-E1R72L2K 4 Node, Dual XEON E5-2600 C602J 4U LGA2011 SuperServer: SSG-6047R-E1R72L2K

Shipping Extra

ATACOM Part #: SYI4_SUPE_47_36

Manufacturer Part#:SSG-6047R-E1R72L2K

Price: $10091.95

Model
Brand	Supermicro
SSG-6047R-E1R72L2K	SuperServer 6047R-E1R72L2K (Black)
Motherboard	Super X9DRD-7LN4F-JBOD
Processor/Cache
CPU	Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *)
Note	† BIOS version 3.0 or above is required
Cache	Up to 30MB
System Bus	QPI up to 8 GT/s
System Memory (per Node)
Memory Capacity	16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V and 1.35V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset	Intel® C602J Chipset
SATA	SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 SATA3 (6Gbps) w/ RAID 0, 1, 5, 10
SAS	SAS2 via LSI 2308; IT Mode / Pass-through
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Renesas SH7757 BMC
Network Controller	Intel® i350 Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	G200 (Renesas SH7757 BMC w/ graphic controller)
Super I/O	Nuvoton W83527
Input / Output (per Node)
Serial ATA	2 x SATA3 (6 Gbps) ports 4 x SATA2 (3 Gbps) ports
SAS	8 x SAS2 ports (6 Gbps)
LAN	4 x RJ 45 Gigabit Ethernet LAN ports 1 x RJ 45 Dedicated IPMI LAN port
USB	9 x USB 2.0 ports total (4 x rear + 4 via header + 1 Type A)
VGA	1x VGA port
Serial Port/Header	1x Fast UART 16550 port / 1 Header
Chassis
Form Factor	4U Rackmount
Model	CSE-847DTS-R000LP (only sold as complete system)
Dimensions
Form Factor	7" x 17.2" x 35" (H x W x D)
Weight Unpopulated	Net Weight: 67 lbs (30.4 kg) Gross Weight: 104 lbs (47.2 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED 2x Network activity LEDs System Overhead LED Power fail LED
Expansion Slots (per Node)
PCI-Express	4x PCI-E 3.0 x 8 Low-profile slot
Drive Bays
Hot-Swap	72x 3.5" SAS2/SATA3 in 36x Hot-swap drive bays (2x HDD per bay w/LEDs for each drive) Double-sided: 24 front + 12 rear HDD Bays
Backplane
SAS2 / SATA3 single expander per backplane
System Cooling
Fans	7x 9cm hot-swap cooling fans Redundant cooling
Power Supply 2000W Redundant Power Supplies
AC Input	1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
DC Output	1100W: +12V/91.7A; +5Vsb/4A 1400W: +12V/116.7A, +5Vsb/4A 1800W: +12V/150.0A; +5Vsb/4A 1980W: +12V/165.0A; +5Vsb/4A 2000W: +12V/166.7A; +5Vsb/4A
Certification	Platinum Certified
System BIOS
BIOS System	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0/ 2.0 USB Keyboard support SMBIOS 2.3 UEFI
Operating Environment/Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature:10°C to 35°C (50°F to 95°F) Non-operating Temperature:-40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:8% to 90% (non-condensing) Non-operating Relative Humidity:5% to 95% (non-condensing)

Supermicro SSG-6047R-E1R72L2K 4 Node, Dual XEON E5-2600 C602J 4U LGA2011 SuperServer: SSG-6047R-E1R72L2K

1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family^†

2. Up to 1TB ECC DDR3, up to
1866MHz; 16x DIMM sockets

3. 4x PCI-E 3.0 x8 slots

4. Intel® i350 GbE Controller; 4x ports

5. 72x 3.5" SAS2/SATA3 HDDs in 36x
    (24 front + 12 rear) Hot-swap Drive
    Bays (2x HDD per bay w/ LEDs for
    each drive); rear 2.5" HDD module

6. Chassis remains securely mounted in
    rack during HDD replacement, safer
    and more reliable than top loading
    solutions

7. 2x 2.5" rear hot-swap drive bays

8. 3x IT mode SAS2 Storage Controllers
(LSI 2308)

9. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN

10. 7x Heavy duty PWM fans

11. 2000W Redundant Platinum Level
Switching power supplies