| Product SKUs |
| Brand | Supermicro |
| SYS-7048R-C1R4+ | SuperServer 7048R-C1R4+ (Black) |
| Motherboard |
| Super X10DRC-LN4+ |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **) Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | Please contact your Supermicro sales representative for additional details. |
| System Memory |
| Memory Capacity | 24x 288-pin DDR4 DIMM sockets Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM |
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SAS | LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel® i350 Quad Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| SAS | 8x SAS3 (12Gbps) ports SuperCap option support |
| LAN | 4x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 3.0 ports (2 rear) 4x USB 2.0 ports (2 rear, 2 front) 1x USB Type A |
| Video | 1x VGA Connector |
| Serial Port / Header | 1x COM/Serial |
| DOM | 2x SuperDOM (Disk on Module) ports |
| Expansion Slots |
| PCI-Express | 2x PCI-E 3.0 x16 (Full-height, Full-length) 3x PCI-E 3.0 x8 (Full-height, Full-length) 1x PCI-E 2.0 x4 (in x8) |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3 UEFI RTC (Real Time Clock) Wakeup |
| Chassis |
| Form Factor | 4U Rackmountable / Tower Optional Rackmount Kit |
| Model | CSE-745TQ-R920B |
| Dimensions and Weight |
| Height | 17.2" (437mm) |
| Width | 7.0" (178mm) |
| Depth | 25.5" (648mm) |
| Package | 24" (H) x 14" (W) x 26.5" (D) |
| Weight | Net Weight: 57 lbs (25.9 kg) Gross Weight: 74.5 lbs (33.8 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power Fail LED |
| Ports | 2x USB Ports |
| Drive Bays |
| Hot-swap | 8x 3.5" Hot-swap SATA3 drive trays 8x 2.5" Hot-swap SAS3 drives in mobile rack |
| Peripheral Bay | 1x 5.25" drive bay (optional devices) |
| SAS / SATA Backplane |
| SAS via backplane (BPN-SAS3-I28A) in Mobile rack • SATA via chassis HDD Backplane CSE-SAS-743TQ-O-P |
| System Cooling |
| Fans | 3x 8cm Hot-swap redundant PWM Cooling Fans 2x 8cm Hot-swap Rear Exhaust PWM Fans & air shroud |
| Power Supply with Power Distributor |
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | 4 Amp @ +5V standby 75 Amp @ +12V |
| Certification | 80 PLUS Platinum Certified |
| PC Health Monitoring |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| FAN | Total of five fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 5x fan connectors Thermal Monitor 2 (TM2) support PECI |
| LED | System info. LED: UID indicator, fan fail/System Overheat Suspend static indicator LED UID/Remote LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
