| Product SKUs |
| Brand | Supermicro |
| SYS-7048R-TR | SuperServer 7048R-TR (Black) |
| Motherboard |
| Super X10DRi |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **) Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | Please contact your Supermicro sales representative for additional details. |
| System Memory |
| Memory Capacity | 16x 288-pin DDR4 DIMM sockets Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video | ASPEED AST2400 BMC |
| Input / Output |
| SATA | 8x SATA3 (6Gbps) ports 2x SATA3 powered ports that support SATA DOM |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | Rear USB: 2x USB 3.0 + 2x USB 2.0 Front USB: 2x USB 2.0 USB Header: 2x 3.0, 2x 2.0, 1x Type A |
| Video | 1x VGA port |
| Serial Port / Header | 1x COM/Serial |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management |
| Software | SuperDoctor® 5 Watch Dog NMI, SPM, SUM IPMI 2.0 Intel Node Manager |
| Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
| Chassis |
| Form Factor | 4U Rackmountable / Tower Optional Rackmount Kit |
| Model | CSE-745TQ-R920B |
| Dimensions and Weight |
| Height | 17.2" (437mm) |
| Width | 7.0" (178mm) |
| Depth | 25.5" (648mm) |
| Package | 24" (H) x 14" (W) x 26.5" (D) |
| Weight | Net Weight: 56 lbs (25.6 kg) Gross Weight: 73.5 lbs (33.6 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power Fail LED |
| Ports | 2x USB Ports |
| Expansion Slots |
| PCI-Express | 3x PCI-E 3.0 x16 (Full-height, Full-length) 3x PCI-E 3.0 x8 (Full-height, Full-length) |
| Drive Bays (per Node) |
| Hot-swap | 8x 3.5" Hot-swap SAS/SATA Drive Trays |
| Peripheral Bay(s) [90o Rotatable] | 2x 5.25" Peripheral Drive Bays 1x 5.25" Bay that fits 3.5" bay devices |
| SAS / SATA Backplane |
| SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| System Cooling |
| Fans | 3x 8cm hot-swap redundant PWM cooling fans 2x 8cm hot-swap exhaust Fans and air shroud |
| Power Supply with Power Distributor |
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | 4 Amp @ +5V standby 75 Amp @ +12V |
| Certification | 80 PLUS Platinum Certified |
| PC Health Monitoring |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| FAN | Total of eight fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
