Product SKUs |
SYS-5086B-TRF | SuperServer 5086B-TRF (Black) |
Motherboards |
Motherboards | X8OBN-F (1) + X8OBN-CPU (4) + X8OBN-BR1 (2) |
Processor/Cache |
CPU | Quad 1567-pin LGA Sockets Supports up to eight Intel® Xeon® 64-bit processor(s) of the same type below: Intel® Xeon® processors 7500* series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-8800 family (10-core, codename Westmere-Ex) supported |
System Memory |
Memory Capacity | 64x 240-pin DIMM sockets Supports up to 1024 GB DDR3 ECC reg. memory |
Memory Type | 1333/1066/978/800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs**** |
DIMM Sizes | 1GB, 2GB, 4GB , 8GB, 16GB |
Memory Voltage | 1.5 V, 1.35V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices |
Chipset | 2x Intel® 7500 (Boxboro-EX) chipset ICH10R |
SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC |
Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics | Matrox G200eW 16 MB DDR2 |
Super I/O | Winbond 83527HG chip |
Input / Output |
SATA | 6x SATA2 ports |
LAN | 3x RJ45 LAN ports (1 for IPMI) |
USB | Total of 8 USB 2.0 ports (2x rear, 4 via 2x internal headers, 2x Type A) |
VGA | 1x VGA port |
Chassis |
Form Factor | 5U Rackmount |
Model | CSE-758A-R2800B |
Expansion Slots |
PCI-Express | 4x PCI-E 2.0 x16 + 2x PCI-E 2.0 x8 (in x16) or 10x PCI-E 2.0 x8 full-height, full-length slots |
Drive Bays |
Hot-swap | 16x 2.5" HDDs |
Peripheral Bay(s) | 2x 5.25" drives |
System Cooling |
Fans | 4x Hot-Swap Cooling Fans 2x Hot-Swap Rear Exhaust Fan |
Shrouds | 4x CPU card air shrouds for SC758 |
Power Supply |
Power Supply | 2800W (2+2) Redundant 1400W high-efficiency power supply with PMBus |
AC Input | 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp |
DC Output +5V standby | 6 Amp |
DC Output +12V | 100 Amp @ 100-140V 117 Amp @ 180-240V |
Certification | 80PLUS |