| Model (spec is for reference, this is base on SYS-7046T-NTR+ Model) |
| Brand | Supermicro |
| SYS-7046T-NTR | SuperServer 7046T-NTR(Black) |
| Processor/Cache |
| Motherboard | Super X8DTN+ |
| Processors | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: - Quad-Core Intel®
Xeon®Processor 5500 sequence (Nehalem-EP processor) |
| QPI | up to 6.4 GT/s |
| System Memory |
| Memory Capacity | 18x 240-pin DIMM sockets Supports up to 144 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Size | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices (per node) |
| Chipset | Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) |
| Nerwork Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization |
| - | - |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Input / Output (per node) |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB on-board 2x USB internal headers( 3 ports) 7 total USB ports, 2.0 Compliant |
| VGA | 1x VGA Port |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option) |
| System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Chassis |
| Form Factor | 4U Rackmountable / Tower Optional Rackmount Kit (CSE-PT26) |
| Model | SC-745TQ-R800B |
| Dimensions |
| H x W x D | 7.0" x17.2" x 25.5" |
| Gross Weight | 63 lbs (28.6kg) |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power Fail LED |
| Ports | 2x USB Ports |
| Expansion Slots (per node) |
| PCI- Express | 2 (x8) PCI-E slots (1 in x16 slot) 1 (x4) PCI-E slot (in x8 slot) |
| PCI-X | 1x 64-bit 133MHz PCI-X (3.3V) slots 2x 64-bit 133/100MHz PCI-X (3.3V) slots |
| Drive Bays (per node) |
| Hot-swap | - 8x Hot-swap Drive Bays
- Supports up to 6x SATA Hard Drives
|
| Backplane |
| Backplane | SAS / SATA Backplane w/ Enclosure Management |
| Peripheral Drives |
| Peripheral Bay(s) | 2x 5.25" Peripheral Drive Bay 1x 5.25" Bay For 3.5" Device |
| - | - |
| System Cooling |
| Fans | 3x 5000 RPM Hot-Swappable Cooling Fans 2x 5000 RPM Hot-Swappable Rear Exhaust Fan |
| Shroud | 1x Air Shroud |
| Power Supply |
| Power Supply | 800W (1 + 1) Redundant AC-DC high-efficiency |
| AC Input | 100 - 240V, 50-60Hz, 10-4 Amp |
| +5V Standby | 4 Amp |
| +12V | 66 Amp |
| +5V | 30 Amp |
| +3.3V | 24 Amp |
| -12V | 0.6 Amp |
