|
Supermicro F617H6-FTPTL+ 4 Node, Dual XEON E5-2600 v2 C602 4U FatTwin LGA2011 SuperServer w/ X9DRFF-7TG+, CSE-F414IS-R1K62B, 1x PCI-Express X8, 2x 10GBase-T, IPMI, 8x 3.5 Inch HDD, 1620W Redundant PSU, SAS, VGA: SYS-F617H6-FTPTL+
|
|
Images shown for reference only
|
|
Supermicro F617H6-FTPTL+ 4 Node, Dual XEON E5-2600 v2 C602 4U FatTwin LGA2011 SuperServer w/ X9DRFF-7TG+, CSE-F414IS-R1K62B, 1x PCI-Express X8, 2x 10GBase-T, IPMI, 8x 3.5 Inch HDD, 1620W Redundant PSU, SAS, VGA: SYS-F617H6-FTPTL+ F617H6-FTPTL+ 4 Node, Dual XEON E5-2600 v2 C602 4U FatTwin LGA2011 SuperServer w/ X9DRFF-7TG+, CSE-F414IS-R1K62B, 1x PCI-Express X8, 2x 10GBase-T, IPMI, 8x 3.5 Inch HDD, 1620W Redundant PSU, SAS, VGA: SYS-F617H6-FTPTL+
|
|
|
|
Shipping Extra
|
|
ATACOM Part #: SYI4_SUPE_F6_37
|
|
Price: $5003.95
|
|
|
|
Model | Brand | Supermicro | SYS-F617H6-FTPTL+ | SuperServer F617H6-FTPTL+ | Processor/Cache | Motherboard | Super X9DRFF-7TG+ | Processors | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *) * Please contact your Supermicro sales representative for additional details Note † BIOS version 3.0 or above is required Cache Up to 30MB | QPI | QPI up to 8 GT/s | System Memory | Memory Capacity | 16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM) | Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | DIMM Size | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | Memory Voltage | 1.5 V / 1.35V | Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) | On-Board Devices | Chipset | Intel® C602 Chipset | SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 | SAS | SAS2 (6Gbps) via LSI 2208 HW RAID 0, 1, 5, 6, 10, 50, 60 support | IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC | Network Controllers | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) | Audio | - | Graphics | Matrox G200eW | Input / Output | Serial ATA | 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) Note:2 of the 4 SATA 2.0 ports are for optional 2x 2.5" HDDs | SAS | 8x SAS2 ports (6Gbps) | LAN | 2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port | USB | 2x USB 2.0 ports (rear) | VGA | 1x VGA port | Serial Port / Header | 1x Fast UART 16550 port | | | Chassis | Form Factor | 4U Rackmount | Model | CSE-F414IS-R1K62B | Dimensions | H x W x D | 17.63" (448mm)x 6.96" (177mm)x 35" (889mm) | Gross Weight | - | Front Panel | Buttons | Power On/Off button System Reset button | LEDs | Power status LED 2x Network activity LEDs System Overheat LED Power fail LED | Ports | - | Expansion Slots | PCI-Express | 1x PCI-E 3.0 x8 Low-profile via riser card 1x PCI-E 2.0 x4 Low-profile via riser card | PCI | - | Drive Bays | Fixed ( per node) | 8x Fixed 3.5" SAS/SATA HDD trays 4x Fixed 3.5" SATA HDD trays Additional 2 Fixed 2.5" SATA HDD Bays optional | Backplane | SAS / SATA Backplane | - | System Cooling | Fans | 8x 8cm heavy duty fans with air shroud and PWM fan speed control | Shroud | - | Power Supply | Power Supply | 1620W high-efficiency redundant power supply w/ PMBus AC Input | | 1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family† 2. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM sockets 3. Expansion slot: 1 PCI-E 3.0 x8 (LP) and 1 PCI-E 2.0 x4 (LP) via riser card 4. I/O ports: 2 10GBase-T, 1 Built-in video, 1 COM port onboard, 2 USB 2.0 ports 5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port 6. 8 Fixed 3.5" SAS/SATA HDD Bays + 4 Fixed 3.5" SATA HDD Bays Additional 2 Fixed 2.5" SATA HDD Bays optional 7. 1620W Redundant Power Supplies Platinum Level (94%) |
|