Supermicro SYS-F628R2-FC0 FatTwin 4U Rackmount High Density-Server (4

Supermicro SYS-F628R2-FC0 FatTwin 4U Rackmount High Density-Server (4 Nodes), C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) DDR4, 8 x 2.5in Bays, GBLAN, IPMI, SATA3/SAS3, PCI-E, Per Node 1280W Redundant Power Supply, w/ X10DRFF-C, CSE-F424BD-R1K28B

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI4_SUPE_FD_0C

Manufacturer Part#:SYS-F628R2-FC0

Price: $4167.95

Product SKUs
SYS-F628R2-FC0	SuperServer F628R2-FC0 (Black)
Motherboard
	Super X10DRFF-C
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP )** Dual Socket R3 (LGA 2011)
Cores / Cache	Up to 18 Cores / Up to 45MB Cache
System Bus	QPI up to 9.6 GT/s
System Memory
Memory Capacity	8x 288-pin DDR4 DIMM slots Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type	2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB
Memory Voltage	1.2 V
Error Detecion	Corrects single-bit errors
On-Board Devices
Chipset	Intel® C612 Express chipset
SAS	SAS3 (12Gbps) via LSI 3008 SW RAID 0, 1, 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® i210 Single Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics	Matrox G200eW
Input / Output
SAS	8x SAS3 (12Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 port
Chassis
Form Factor	4U Rackmount
Model	CSE-F424BD-R1K28B
Dimensions
Width	17.63" (448mm)
Height	6.96" (177mm)
Depth	29" (737mm)
Package	28.3" (W) x 15.0" (H) x 42.4" (D)
Weight	Net Weight: 105 lbs (47.63 kg) Gross Weight: 150 lbs (68.04 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED
Expansion Slots
PCI-Express	1 PCI-E 3.0 x16 (LP) via riser card
Drive Bays
Hot-swap	8x 2.5" Hot-swap SAS/SATA HDD trays
Fixed	2x 3.5" Fixed SATA HDD trays
System Cooling
Fans	8x 8cm 11K RPM Rear fans with air shroud and PWM fan speed control
Power Supply with Power Distributor
	1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input	1000W Output @ 100-140V, 8-12A, 50-60Hz 1280W Output @ 200-240V, 6-8A, 50-60Hz
DC Output	1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A
Certification	80 PLUS PlatinumCertified
System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s

2. Up to 512GB ECC DDR4 2133MHz;
8x DIMM sockets

3. 1x PCI-E 3.0 x16 (LP) slot

4. Front I/O ports: 2 GbE LAN, 2 USB 3.0,
and 1 VGA connector

5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port

6. 8x 2.5" Hot-swap SAS/SATA HDD
Bays; SAS3 (12Gbps) via LSI 3008

7. 1280W Redundant Power Supplies
Platinum Level (95%)