Supermicro SYS-F618R2-RC0+ FatTwin 4U Rackmount High Density-Server (8

Supermicro SYS-F618R2-RC0+ FatTwin 4U Rackmount High Density-Server (8 Nodes), C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) DDR4, 6 x 2.5in Bays, GBLAN, IPMI, SAS/SATA3, PCI-E, Per Node 2000W Redundant PSU w/ X10DRFR-N & CSE-F418BC-R2K04B

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI4_SUPE_FD_16

Manufacturer Part#:SYS-F618R2-RC0+

Price: $10706.95

Product SKUs
Brand	Supermicro
Manufacturer Part Number	SYS-F618R2-RC0+
Motherboard
	Super X10DRFR-N
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) Up to 22 Cores† / Up to 55MB† Cache QPI up to 9.6 GT/s † BIOS version 2.0 or above is required
System Memory
Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
On-Board Devices
Chipset	Intel® C612 chipset
SAS	LSI 3008 SAS3 (12Gbps) controller
SATA	SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC
Input / Output
SAS	6 SAS3 (12Gbps) ports
LAN	2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports
VGA	1x VGA port
Chassis
Form Factor	4U Rackmount
Model	CSE-F418BC-R2K04B
Dimensions
Width	17.63" (448mm)
Height	6.96" (177mm)
Depth	29" (737mm)
Weight	Net Weight: 150 lbs (68.04 kg) Gross Weight: 200 lbs (90.72 kg)
Colors	Black
Front Panel
Buttons	Power On/Off button UID button
LEDs	Power status LED Hard drive activity LED 2 Network activity LEDs Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
PCI-Express	1 PCI-E 3.0 x16 Low-profile 1 PCI-E 3.0 x8 (Micro LP) MicroLP Adapter Matrix (Networking options)
Drive Bays
Hot-swap	6x 2.5" Hot-swap SAS/SATA drives Optional NVMe support Note: NVMe support requires 2 CPUs installed
System Cooling
Fans	3x 4cm 14k RPM middle fans
Power Supply
	2000W Redundant Power Supplies with PMBus Total Output Power 1000W/2000W Dimension (W x H x L) 76 x 40.4 x 336 mm Input 100-127 Vac / 12-9.5 A / 50-60 Hz 200-220 Vac / 10-9.5 A / 50-60 Hz 220-230 Vac / 10-9.8 A / 50-60 Hz 230-240 Vac / 10-9.8 A / 50-60 Hz 200-240 Vac / 11.8-10 A / 50-60 Hz (UL/cUL only) +12V Max: 83.3A & Min: 0A (100-127 Vac) Max: 150A & Min: 0A (200-220 Vac) Max: 165A & Min: 0A (220-230 Vac) Max: 166.7A & Min: 0A (230-240 Vac) Max: 166.7A & Min: 0A (200-240 Vac)(UL/cUL only) +5Vsb Max: 1A / Min: 0A Output Type 27 Pairs Gold Finger Connector Certification: UL/cUL/CB/BSMI/CE/CCC Titanium Level
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

8 Hot-plug System Nodes in 4U Each node supports:

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s

2. Up to 2TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 16x DIMM slots

3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x8 (Micro Low Profile)

4. I/O ports: 2 GbE ports, 1 VGA, 2 USB 3.0 ports

5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port

6. 6x 2.5" Hot-swap SAS/SATA or 4x 2.5"Hot-swap SAS/SATA + 2x SAS/SATA/NVMe hybrid; SAS3 via LSI 3008

7. 3x heavy duty internal fans

8. 2000W High efficiency (96%) Redundant PSU; Titanium Level