Supermicro SYS-F628R3-RC0BPT+ FatTwin 4U Rackmount High Density-Server

Supermicro SYS-F628R3-RC0BPT+ FatTwin 4U Rackmount High Density-Server (4 Nodes), C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) DDR4, 8(6+2) x 3.5in Bays, 10GBLAN, IPMI, SAS/SATA3, PCI-E, Per Node 1280W Redundant PSU w/ X10DRFR-NT & CSE-F424AS-R1K28B

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI4_SUPE_FD_2B

Manufacturer Part#:SYS-F628R3-RC0BPT+

Price: $6678.95

Product SKUs
Brand	Supermicro
Manufacturer Part Number	SYS-F628R3-RC0BPT+
Motherboard
	Super X10DRFR-NT
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) Up to 22 Cores† / Up to 55MB† Cache QPI up to 9.6 GT/s † BIOS version 2.0 or above is required
System Memory
Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
On-Board Devices
Chipset	Intel® C612 chipset
SAS	SAS 3.0 (12Gbps) via LSI 3008 HBA/SW RAID 0, 1, 10 support
SATA	SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI).
Graphics	ASPEED AST2400
Input / Output
SAS	8 SAS3 (12Gbps) ports
LAN	2 RJ45 10GBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports
VGA	1x VGA port
Chassis
Form Factor	4U Rackmount
Model	CSE-F424AS-R1K28B
Dimensions
Width	17.63" (448mm)
Height	6.96" (177mm)
Depth	29" (737mm)
Weight	Net Weight: 105 lbs (47.63 kg) Gross Weight: 150 lbs (68.04 kg)
Colors	Black
Front Panel
Buttons	Power On/Off button UID button
LEDs	Power status LED Hard drive activity LED 2 Network activity LEDs Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
PCI-Express	1 PCI-E 3.0 x16 (LP) + 1 Micro LP MicroLP Adapter Matrix (Networking options)
Drive Bays
Hot-swap	(6+2) 3.5" Hot-swap SAS3 HDD trays 8 SAS3 or 6x SAS3 + 2 NVMe (optional) Note: NVMe support requires 2 CPUs installed
System Cooling
Fans	2x 8cm 11k RPM middle fans
Power Supply
	1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 AC Input 1000W Output @ 100-140V, 8-12A, 50-60Hz 1280W Output @ 180-240V, 6-8A, 50-60Hz DC Output 1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A Certification: Platinum Certified
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

4 Hot-plug System Nodes in 4U Each node supports:

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s

2. Up to 2TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 16x DIMM slots

3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x8 (Micro Low Profile) See Cable Configuration Map

4. I/O ports: 2 10GBase-T ports, 1 video, 2 USB 3.0 ports

5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port

6. 6+2 3.5" Hot-swap SAS3 HDD Bays 8x SAS3 or 6x SAS3 + 2x NVMe SAS3 via LSI 3008 controller

7. 2x 80mm 11k RPM middle fans

8. 1280W Redundant Power Supplies Platinum Level (95%)