|
Supermicro SSG-2029P-E1CR48L (Call - Complete System Only) , 2U Rackmount Storage Server Barebone, Dual Intel Xeon Scalable Socket P(LGA3647) CPU, C621 Chipset, DDR4 2666MHZ Up to 3TB, 2XPCI-E 3.0X16, IPMI, 48XSAS3/SATA3 2.5 Inch Bays,
|
|
Images shown for reference only
|
|
|
|
|
|
Shipping Extra
|
|
ATACOM Part #:SYI4_SUPE_I9_13
Manufacturer Part #:SSG-2029P-E1CR48L |
|
Price: $4444.95
|
|
|
|
|
| |
| SSG-2029P-E1CR48L |
- SuperStorage 2029P-E1CR48L (Black)
|
|
|
CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
3 UPI up to 10.4GT/s
- Support CPU TDP 70-165W
|
Cores |
|
Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
|
|
Memory Capacity |
- 24 DIMM slots
- Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
|
|
Chipset |
|
SAS |
- SAS3 (12Gbps) via Broadcom 3008; IT Mode
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10, 50
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Video |
|
|
|
Serial ATA |
|
LAN |
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 2 USB 3.0 ports (rear)
- 1 Type A
|
Video |
- 1 VGA D-Sub connector port
|
Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
BIOS Type |
|
|
|
Software |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Power fail LED
|
|
|
PCI-Express |
- 2 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 slot
- 1
SIOM
card support
(must bundle with network card)
|
| |
| Hot-swap |
- 48 Hot-swap 2.5" SAS3/SATA3 drive bays
- 2 Hot-swap 2.5" SATA3 drive bays (rear)
|
| |
| SAS3 12Gb/s direct attached storage backplane, w/ 24x SAS3 2.5" drive slots |
| |
| Fans |
- 5x 8cm high-performance PWM fans
|
| |
1600W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
+12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
12Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
| |
| RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|