| Model
|
| Brand
|
Supermicro |
| SBi-7125W-S6 |
Processor Blade SBI-7125W-S6 (Black) |
| Motherboard |
| Motherboard |
Super B7DW3 |
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.2 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus |
1600 / 1333 / 1066 MHz system bus
|
| Operating System Software |
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
|
| System Memory |
| Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
|
| Memory Type |
800* /667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
512MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage |
1.5 & 1.8V |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| On-Board Devices |
| Chipset |
Intel® 5400 (Seaburg) chipset
MCH + ESB2
|
| Infiniband Support |
- 4x DDR (20Gb/s) Infiniband mezzanine HCA (Optional)
|
| SAS |
- LSI SAS 1078
- RAID 0, 1, 5, 6, 10, 50, 60 support
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 via Chassis Management Module (CMM) |
| Network Controllers |
Intel® (ESB2) 82563EB Dual-Port Gigabit Ethernet PHY Controller
Supports SerDes (Serializer/Deserializer)
Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Super I/O |
Winbond 83627HF chip |
| Clock Generator |
CK410B chip |
| System BIOS |
| BIOS Type |
16Mb SPI EEPROM with Phoenix ® BIOS |
| BIOS Features |
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.1
PCI 2.2
ACPI 2.0
USB Keyboard support
Hardware BIOS Virus protection
|
| Dimensions
|
| Dimensions (H x W x D) |
11.32" x 1.67" x 18.9" |
| Front Panel
|
| Buttons |
Power On/Off button
KVM button
|
| LEDs |
Power LED
UID / KVM LED
Network Activity LED
Fault LED
|
| Connector |
SUV (Serial/USB/Video) & KVM Connector |
| Drive Bays |
| Hot-swap |
6x 2.5" SAS/SATA Hot-swap drive bays |
| Input / Output |
| InfiniBand |
1 Available InfiniBand Card Connection |
| KVM |
1 Front Connector for Supermicro KVM Card |
| SIMBL |
1 SIMBL Slot |
| Operating Environment / Compliance |
| Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
