|
|
Supermicro SYS-8046B-6RF Tower Xeon 7500 DDR3 1333, IPMI, Dual GBLAN, 5x 3.5 SAS, 1400W PSU, LSI 2108 RAID
|
|
Images shown for reference only
|
|
|
Supermicro SYS-8046B-6RF Tower Xeon 7500 DDR3 1333, IPMI, Dual GBLAN, 5x 3.5 SAS, 1400W PSU, LSI 2108 RAID Xeon 7500 DDR3 1333, IPMI, Dual GBLAN, 5x 3.5 SAS, 1400W PSU, LSI 2108 RAID: SYS-8046B-6RF
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYIT_SUPE_80_10
|
|
Price: $4298.95
|
|
|
|
|
| Model | | Brand | Supermicro | | SYS-8046B-6RF |
- SuperServer 8046B-6RF (Black)
| | Motherboard | Super X8QB6-F |
| Processor/Cache | | CPU |
- Quad 1567-pin LGA Sockets
- Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below:
- Intel® Xeon® Processor 7500 Series (Nehalem-EX)
| | QPI | up to 6.4 GT/a | | System Memory | | Memory Capacity |
- 32x 240-pin DIMM sockets
- Supports up to 512 GB DDR3 ECC reg. memory at 1066/978/800MHz speed
- Memory Mirroring supported
| | Memory Type | - 1333*/1066/800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| | Memory Voltage | 1.5 V, 1.35V |
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | On-Board Devices | | Chipset |
- Intel® 7500 (Boxboro-EX) chipset
- ICH10R
| | SAS |
- LSI 6Gbps SAS 2108 controller
- RAID 0, 1, 5, 6, 10 support
- BBU (battery backup) extension kit (optional)
| | SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5 support (Windows)
- RAID 0, 1 support (Linux)
| | IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
| | Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | Super I/O | | | Input / Output | | LAN | | | USB |
- 2x USB rear ports
- 2x USB internal headers (3 ports)
- Total 5 USB 2.0 Compliant
| | VGA | | | Serial Port |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | Chassis | | Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit
(MCP-290-00059-0B)
| | Model | | | Dimensions | | Form Factor | 17.8" x 7" x 28.4" (H x W x D) | | Expansion Slots | | PCI-Express |
- Auto-switch for 2 (x16) PCI-E 2.0 or
1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
4 (x8) PCI-E 2.0 slots
| | Drive Bays |
| Hot-swap |
- 5x 3.5" SAS / SATA Hard Drives
- Additional 5x 3.5" SAS/SATA Hard Drives available with optional M35 Mobile Rack
|
| Peripheral Bay(s) |
- 3x 5.25" Peripheral Drive Bay
| | Backplane | | Hard drive Backplane | SAS/SATA Hard Drive Backplane | | System Cooling | | Fans |
- 3x 80mm RPM Hot-Swappable Cooling Fans
- 3x 80mm RPM Hot-Swappable Rear Exhaust Fan
| | PSU | | Power Supply | Redundant 1400W high-efficiency power supply with PMBus |
| 1. Quad Intel® Xeon® processor 7500
series, with QPI up to 6.4 GT/s
2. Up to 512GB DDR3 ECC Registered
DIMM
3. Auto-switch for: 2 (x16) PCI-E 2.0 or
1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
4 (x8) PCI-E 2.0 slots
4. Intel® 82576 Dual-Port Gigabit
Ethernet Controller
5. 5 Total Hot-swap Drive Bays:
5x SAS/SATA Drives Support
6. 1400W Gold Level Redundant
High-efficiency Power Supplies
7. LSI 2108 8-Port 6Gbps SAS Controller;
RAID 0, 1, 5, 6, 10 Support
8. Integrated IPMI 2.0 with Dedicated LAN |
|
