| Product SKUs |
| Brand | Supermicro |
| Manufacturer Part Number | PIO-226TT-H6RF-NODE |
| Device Type | Node for SYS-2026TT-H6RF |
| Built-in Devices | X8DTT-HEF+ |
| Form Factor | 2U Rackmount |
| Processor/Cache |
| Supports up to two Intel® 64-bit Xeon® processor(s) - Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W, X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W Dual 1366-pin LGA Sockets QPI up to 6.4 GT/s |
| System Memory |
| Memory Capacity | 12x 240-pin DIMM sockets, Memory Mirroring supported Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory or up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB |
| Memory Voltage | 1.5V |
| Error Detection | Corrects single-bit errors, Detects double-bit errors (using ECC memory), Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices |
| Chipset | Intel® 5520 (Tylersburg) chipset, ICH10R + IOH-36D |
| Clock Generator | 932S421 chip |
| SATA | Intel ICH10R SATA 3.0Gbps Controller - RAID 0, 1, 5, 10 support |
| SAS | LSI 6Gbps SAS 2108 w/ Hardware RAID support via BPN-ADP-SAS2-H6iR - RAID 0, 1, 10, 5, 50, and 6 support |
| Graphics | Matrox G200eW |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | 1x Realtek RTL8201N PHY (dedicated IPMI) Dual Intel® 82574L Gigabit Ethernet Controller - Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Super I/O | Winbond W83527HG chip |
| Input / Output |
| SATA | Six Serial ATA ports, 6 SATA hard drives supported |
| LAN | 2x RJ45 LAN ports, 1x RJ45 Dedicated IPMI LAN port |
| USB | 2 rear + 1 header (2 Ports), 4 total USB ports, 2.0 Compliant / 1.1 Compliant |
| Serial Port / Header | 1 Fast UART 16550 serial port |
| Front Panel |
| Buttons | Power On/Off button, UID button |
| LEDs | Power LED (on power button), Network activity LED, System Overheat/fan fail/power fail/ LED, UID LED (on UID button) |
| Expansion / Connectivity |
| Expansion Slots Total (Free) | 1 (x16) PCI-E ( Low Profile) |
| System BIOS |
| BIOS Features | Plug and Play (PnP), PCI 2.2, ACPI up to 3.0, USB Keyboard support |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
