| Model |
| Brand | Supermicro |
| Product SKUs |
SuperServer PIO-5037MC-H8TRF-NODE
(Black) |
| Motherboard | Super X9SCD-F |
| Alternative SKU |
| System |
|
| MB + Chassis |
MBD-X9SCD+-F +
CSE-938H-R920B |
| Features |
- Cost effective SKU with 920W redundant power supplies
|
| Processor/Cache |
| CPU |
- Intel® Xeon® processor E3-1200 v2 series, Intel® 2nd Gen. Core i3 & Intel® Pentium® family processors***
- Socket H2 (LGA 1155)
|
| System Memory |
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| DIMM Type | 1333/1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated UDIMMs |
| DIMM Sizes |
|
| Memory Voltagel |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On Board Devices |
| Chipset |
|
| SATA |
- 1x SATA DOM
- 2x SATA 3.0 (6Gbps) w/ RAID 0, 1
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Hearder |
- 1 USB header & 1 Type A USB, TPM ready
|
| Graphics |
|
| Super I/O |
|
| Network Devices |
| Micro-LP NIC |
- Intel® 82580DB GbE controller
- iSCSI boot and PXE support
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Expansion Slots(Per Node) |
| PCI-Express |
|
| Input / Output |
| Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| KVM |
- 1x VGA, 1x COM, and 2x USB 2.0 ports
|
| System BIOS |
| BIOS Type |
- 64Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
| Rear Window |
| Switch |
|
| Chassis |
| Form Factor |
|
| Model |
|
| Dimentions |
| Height | |
| Width | |
| Depth | |
| Weight |
- 62.2 lbs (28.21 kg) - barebone
|
| Available Colors |
|
| Front Panel |
| Buttons |
|
| LEDs |
- Power LED
- Node status LED
|
| Drive Bays |
| Hot-swap |
- 2x 3.5" hot-swap SATA3 (6Gbps) HDDs per node; up to 16 HDDs total
- Enterprise SATA HDD only recommended
|
| System Cooling |
| Fans |
- 4x 8cm Heavy duty fans with optimal cooling zone
|
| Power Supply |
| Note |
1620W high-efficiency redundant power supply |
| AC Input |
- 1000W: 100-120 V, 50-60 Hz, 12-10 Amp
- 1200W: 120-140 V, 50-60 Hz, 12-10 Amp
- 1620W: 180-240 V, 50-60 Hz, 10.5-8 Amp
|
DC Output +5V standby
|
|
| DC Output +12V |
- 1000W: 84 Amp
- 1200W: 100 Amp
- 1620W: 135 Amp
|
| Certification |
Platinum Certified
(Cert. in progress) |
| PC Health Monitoring |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
|
| Temperature |
Monitoring for CPU and chassis environment |
| Operating Environment/Compliance |
| RoHS |
|
| Opetraing Temperature |
10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature |
-40°C to 70°C (-40°F to 158°F) |
| Operating relative Humidity |
8% to 90% (non-condensing) |
| Non-operating Humidity |
5% to 95% (non-condensing) |
| Regulatory (System) |
- USA - UL, FCC
- Canada - UL, CSA, ICES-003 (FCC)
- Japan - VCCI
- Europe - CE, CB
- AUS/NZ - C-tick
|
