Model |
Brand | Supermicro |
Product SKUs |
SuperServer PIO-5037MR-H8TRF-NODE
(Black) |
Motherboard | Super X9SRD-F |
Processor/Cache |
CPU |
- Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 12 cores and up to 130W)
|
Note |
† BIOS version 3.0 or above is required |
Cache |
|
System Bus |
|
System Memory |
Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 128 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
DIMM Type |
- 1866/1600/1333/1066MHz ECC DDR3, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltagel |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On Board Devices |
Chipset |
|
SATA |
- 1x SATA DOM
- 2x SATA 3.0 (6Gbps) w/ RAID 0, 1
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Hearder |
- 1 USB header & 1 Type A USB, TPM ready
|
Graphics |
|
Super I/O |
|
Network Devices |
Micro-LP NIC |
- Intel® i350, 2x Gigabit LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
Input / Output |
Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
KVM |
- 1x VGA, 1x COM, and 2x USB 2.0 (with KVM dongle) ports
|
System BIOS |
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
Rear Window |
Switch |
|
Chassis |
Form Factor |
|
Model |
|
Dimentions |
Height | |
Width | |
Depth | |
Weight |
- 62.2 lbs (28.21 kg) - barebone
|
Available Colors |
|
Front Panel |
Buttons |
|
LEDs |
- Power LED
- Node status LED
|
Expansion Slots |
PCI-Express |
|
Drive Bays |
Hot-swap |
- 2x 3.5" hot-swap SATA3 (6Gbps) HDDs per node; up to 16 HDDs total
- Enterprise SATA HDD only recommended
|
System Cooling |
Fans |
- 4x 8cm 11K RPM, 4-pin PWM cooling fans
|
Power Supply |
Note |
1620W high-efficiency redundant power supply w/ PMBus |
AC Input |
- 1000W: 100-120 V, 50-60 Hz, 12-10 Amp
- 1200W: 120-140 V, 50-60 Hz, 12-10 Amp
- 1620W: 180-240 V, 50-60 Hz, 10.5-8 Amp
|
DC Output
|
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
|
PC Health Monitoring |
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
|
Temperature |
- Monitoring for CPU and chassis environment
|
Operating Environment/Compliance |
RoHS |
|
Opetraing Temperature |
10°C to 35°C (50°F to 95°F) |
Non-operating Temperature |
-40°C to 70°C (-40°F to 158°F) |
Operating relative Humidity |
8% to 90% (non-condensing) |
Non-operating Humidity |
5% to 95% (non-condensing) |