Product SKUs |
Brand | Supermicro |
X8DTT-HF+ | Node for SYS-6026TT-HTF |
Processor/Cache |
CPU | Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W Dual 1366-pin LGA Sockets, Supports up to two Intel® 64-bit Xeon® processor(s) |
System Bus | QPI up to 6.4 GT/s |
System Memory |
Memory Capacity | 12x 240-pin DIMM sockets, Memory Mirroring supported Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory or up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory |
Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB , 8GB, 16GB |
Memory Voltage | 1.5 V |
Error Detection | Corrects single-bit errors, Detects double-bit errors (using ECC memory), Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices |
Chipset | Intel® 5500 (Tylersburg) chipset, ICH10R + IOH-36D |
SATA | Intel ICH10R SATA 3.0Gbps Controller - RAID 0, 1, 5, 10 support |
IPMI | Support for Intelligent Platform Management Interface v.2.0 Winbond® WPCM450 BMC IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Network Controllers | Dual Intel® 82574L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics | Matrox G200eW |
Input / Output |
SATA | Six Serial ATA ports, 3 SATA hard drives supported |
LAN | 1x RJ45 Dedicated IPMI LAN port, 2x RJ45 LAN ports |
USB | 4 total USB ports, 2.0 Compliant / 1.1 Compliant - 2 rear + 1 header (2 Ports) |
Video | 1x VGA port |
Serial Port / Header | 1 Fast UART 16550 port |
Expansion Slots |
PCI-Express | 1 (x16) PCI-E ( Low Profile) |
Chassis |
Form Factor | 2U Rackmount |
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |