| Brand | TYAN |
| Mfr. part number | B8226G24V4H |
| System |
| Form Factor | 1U Rackmount |
| Chassis Model | GT24 |
| Dimension (D x W x H) | 25.4" x 17.2" x 1.72" (645 x 436 x 43.6mm) |
| Motherboard | S8226GM3NR |
| Board Dimension | EEB, 12"x13" (305x330mm) |
| Front Panel |
| Button | (1) RST / (1) NMI / (1) ID / (1) PWR w/ LED |
| LEDs | (1) ID / (1) Warning / (3) LAN / (1) Reserved |
| I/O Ports | (2) USB ports |
| External Drive Bay |
| Type/ Q'ty | 2.5" or 3.5" Hot-Swap / (4) |
| HDD backplane support | SATA-II 3.0Gb/s |
| System Cooling Configuration |
| Fan | (5) 4cm fans |
| Power Supply |
| Type | ERP1U |
| Efficiency | PFC / 80-plus Silver |
| Input Range | Full-range AC(100-240V) |
| Frequency | 60 Hertz |
| Output Watts | 500 Watts |
| Processor |
| Supported CPU Series | AMD 45nm 4-Core/6-Core Opteron 4100 Series Processors (Lisbon) |
| Average CPU Power (ACP) wattage | Up to 80W |
| System Bus | Up to 6.4 GT/s Hyper-Transport link support |
| Chipset |
| Chipset | AMD SR5690 + SP5100 |
| Super I/O | Winbond W83627DHG-P |
| Memory |
| Supported DIMM Qty | (16) DIMM slots |
| DIMM Type / Speed | U/RDDR3 & LV RDDR3, 800/1066/1333 MHz |
| Capacity | Up to 128GB |
| Memory channel | 4 Channels per CPU |
| Memory voltage | 1.5V/ 1.35V |
| Expansion Slots |
| PCI-E | (2) PCI-E Gen.2 x16 slots |
| Pre-install TYAN Riser Card | M2091, PCI-E x16 1U riser card (left) / M2091-R, PCI-E x16 1U riser card (right) |
| LAN |
| Port Q'ty | (3) |
| Controller | Intel 82574L / Intel 82576EB |
| Graphic |
| Connector type | D-Sub 15-pin |
| Resolution | 1600x1200@60Hz |
| Chipset | Aspeed AST2050 |
| I/O Ports |
| USB | (4) ports (2 at front, 2 at rear) |
| VGA | (1) D-Sub 15-pin port |
| RJ-45 | (3) ports |
| System Monitoring |
| Chipset | Winbond W83795G |
| Temperature | Monitors temperature for CPU & system environment |
| LED | Fan fail LED indicator / Over temperature warning indicator |
| Others | Chassis intrusion detection / Watchdog timer support |
| Server Management |
| Onboard Chipset | Onboard Aspeed AST2050 |
| AST2050 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / BIOS update |
| AST2050 iKVM Feature | 24-bit high quality video compression / Dual 10/100 Mb/s MAC interfaces |
| BIOS |
| Brand / ROM size | AMI / 4MB |
| Feature | Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot / ACPI 2.0 power management /Power on mode after power recovery / User-configurable H/W monitoring / Auto-configurable of hard disk types |
| Regulation |
| FCC (DoC) | Class A |
| CE (DoC) | Yes |
| Operating Environment |
| Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) |
| In/Non-operating Humidity | 90%, non-condensing at 35° C |
| RoHS |
| RoHS 6/6 Complaint | Yes |
| Package Contains |
| Barebone | (1) GT24B8226 Barebone |
| Heatsink / Cooler | (2) 1207-pin CPU heatsinks |
| Rail kit | (1) CRAL-0031, sliding rail kit for KGT24/ KGT62 |
| Manual | (1) MB User's manual + (1) BB User's manual |
| Installation CD | (1) TYAN installation CD |
| Cable Power Cord | (1) CCBL-0310, US type power cord / (1) CCBL-0300, EU type power cord |
